arthanacom: Canon ix6560 New Problem cyclec blingking 3times

Canon ix6560 New Problem cyclec blingking 3times

Operator Call Error (by Alarm LED Lit in Orange) Troubleshooting Errors and warnings are displayed by the following ways:

3 times Paper jam. [1300] Remove the jammed paper and press the Resume/Cancel button. - ASF unit - Pressure roller unit

Service Call Error (by Cyclic Blinking of Alarm and Power LEDs) blinking of Alarm and Power LEDs Error Error

3 times Line feed error [6000]

-(1) Smearing or scratches on the LF slit film: Clean the LF slit film using lintfree paper.

-(2) Foreign material in the LF drive: Remove foreign material.

-(3) Cable connection Re-connect the cables. If any damage or breakage of the cable is found, replace the cable.

more detail

One day, I am fine a printer ix6560 Disorders

by dialing code green and orange lights, illuminated alternately 21 times.
Discover the causes, and its settlement GO

Furge Unit

Damage to the printer canon ix6560 with indicator lights flash alternately green and orange / spinning, 7 times it caused absober is full, because the use of these devices has a maximum, in addition to the device must be dismantled and replace its parts (absober) and also control the unit Logicboard IC must be refreshed, by using a program which particular service tols are issued by the manufacturer of the device itself 7 times Ink absorber full [5B00] [5B01] (1) Ink absorber condition: Replace the ink absorber, and reset the ink absorber counter value in the EEPROM. - Absorber kit ATTENTION!! If you do not have the expertise, in repairs you should not disassemble your device should contact the repair center, which is nearest to your city for the problems in this section shall be handled by the service center we are not responsible in case of
errors or more